The 916SA Multipoise Condensing Gas Furnace features the single-stage Legacy™ System. The fixed-speeds, constant torque (MCT) ECM blower motor is at the heart of the electrical efficiency provided by this furnace. With an Annual Fuel Utilization Efficiency (AFUE) of 97.0% AFUE, this furnace provides added savings over standard gas furnaces. Improved serviceability with the 3 digit status display and NFC enabled board allowing setup via the service tech app. This Legacy Gas Furnace features 4-way multipoise installation flexibility, and is available in model eleven sizes. All sizes except the 26,000 BTUh model can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. The 26,000 BTUh model can use the same 2-pipe venting system using outside air for combustion, but is not considered direct-vent. A Bryant Legacy Control and Legacy Air Conditioner or Heat Pump, can be used to form a complete Legacy Line System. All sizes are design certified in Canada. Specific sizes are design certified for use in Manufactured Housing (Mobile Home) applications when used with factory-approved MH accessory kit.
PERFORMANCE • Multi 18-speed, constant torque (MCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation. • Enhanced diagnostics with easy to read 3-digit display for faults and status. • Single-speed inducer motor, and single-stage gas valve. • Silicon Nitride PerfectLight™ Hot Surface Igniter. • Perfect Humidity® technology removes more moisture than a standard furnace during cooling operation (when installed with a matched air conditioner or heat pump) • Adjustable blower speed for heating and cooling. • Aluminized-steel primary heat exchanger. • Stainless-steel condensing secondary heat exchanger. INSTALLATION FLEXIBILITY • On-board NFC antenna makes setup a tap away when using the Bryant service technician app. • 4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow for optional venting through-the-cabinet downflow venting capability. • Factory-configured ready for upflow applications. • Ideal height 35” (889 mm) cabinet: short enough for taller coils, but still allows enough room for service. • Two-pipe venting, single-pipe venting or ventilated combustion air. APPLICATIONS • Approved for Twinning applications with manufacturer’s approved accessory kit. • Approved for Manufactured Housing/Mobile Home applications with MH accessory kit. • Convertible to propane with gas conversion accessory kit. CERTIFICATIONS • All sizes meet ENERGY STAR® Version 4.1 criteria for gas furnaces: 95%+ AFUE. • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193. • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirements.
