The 926TC Multipoise Variable 25-Speed Condensing Gas Furnace features the two-stage Preferred™ Series System. The Perfect Heat® technology two-stage gas valve is at the heart of the comfort provided by this furnace, along with the variable-speed ECM blower motor, and two-speed inducer motor. With an Annual Fuel Utilization Efficiency (AFUE) up to 96.7% AFUE, the Preferred™ Series two-stage gas furnace provides exceptional savings as well when compared to standard gas furnaces. This Preferred™ Series Gas Furnace also features 4-way multipoise installation flexibility, and is available in nine model sizes. The 926TC can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. All sizes are design certified in Canada. This furnace is not designed for use in recreation vehicles, manufactured (mobile) homes or outdoors.
PERFORMANCE • Variable 25-speed, constant-torque (VCT) ECM blower motor, two-speed inducer motor, and two-stage gas valve • Fully-insulated casing including blower section • Aluminized-steel primary heat exchanger • Stainless-steel condensing secondary heat exchanger • Silicon Nitride Perfect Heat™ Hot Surface Igniter • Adjustable blower speed for heating, cooling, continuous fan, and dehumidification • Perfect Heat Technology® intelligently stages low heat cycles to match indoor conditions • Fan On Plus™ Technology allows adjustment to the constant fan speed from a compatible thermostat INSTALLATION FLEXIBILITY • 4-way multipoise design for upflow, downflow or horizontal installations, with unique vent elbow and optional throughthe-cabinet downflow venting capability • On-board NFC antenna makes setup a tap away when using the Bryant service technician app • Factory-configured ready for upflow applications • Installation flexibility: sidewall or vertical vent • Ideal height 35” (889 mm) cabinet: short enough for taller coils, but still allows enough room for service • Direct-vent/sealed combustion, single-pipe venting or ventilated combustion air APPLICATIONS • HYBRID HEAT® Dual Fuel Compatible • Convertible to propane with gas conversion accessory kit • Convenient Air Purifier and Humidifier connections • Twinning capable with accessory kit • 5 ton sizes allow 15 Amp breaker with accessory (order separately) • SmartEvap™ technology prevents condensate that remains on the coil after a dehumidification cycle from re-humidifying throughout the home CERTIFICATIONS • All sizes meet ENERGY STAR® Version 4.1 criteria for gas furnaces: 95.0%+ AFUE • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193 • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement LIMITED WARRANTY * • Default 5-year parts limited warranty • Default 20-year heat exchanger limited warranty - 10-year parts and lifetime limited heat exchanger warranty with timely registration* Equipment must be registered within 90 days of original installation, except in jurisdictions where warranty benefits cannot be conditioned on registration. *Applies to original purchaser/homeowner and not available to subsequent oweners.See warranty certificate for complete details and restrictions, including warranty coverage of other applications.