Natural Gas to Propane Conversion Kit

FEATURES

This kit is for conversion of furnaces equipped with Honeywell VR8205Q Series 2-stage gas valves certified for use with Natural Gas (and so marked) to units functionally the same as the certified furnace for use with Propane Gas. Before the furnace can be operated with Propane Gas, the Propane low pressure switch must be installed, and a gas valve conversion kit must be installed and main burner orifices must be replaced with properly sized orifices.

The orifices provided in this kit are stamped to indicate the size (twist drill number) and are sized for commercially pure propane gas ONLY. Do NOT use them with butane or a mixture of butane and propane gas or at elevations above 2000 ft. (610 M). The parts list specifies the size orifices supplied in the kit. Compare the size marking on the orifices with the sizes as listed in the parts list. Make sure you have the correct main burner orifices.

Extreme care is used to assure that this kit contains the proper orifices. (Oversized orifices could result in hazardous conditions, especially if the venting is inadequate.) For that reason, we recommend that the installer check the size of the orifice with a new twist drill of the correct size. This procedure assures that the orifices provided are the correct size.

INCLUDES

• 5 Burner Orifice #54 (333730-701)
• 1 Honeywell Conv. Kit #396021 (1011828)
• Low Pressure Switch LGPS (1008801)
• 1 Fitting Assy. (1009775)
• 1 Inlet Fitting (1147904)
• 1 Wire Assy. (1173071)
• 1 Field Conversion Label (1009678)
• 1 Propane Conversion Label (335953-101)
• 1 Derate Label (335952-101)
• 1 Instructions
• 5 Burner Orifice #55 (333730-707)
• 5 Burner Orifice #56 (333730-708)